AW9 S51 photo-etched parts with decals for 1/144 HGUC MSZ-006 Zeta Gundam 2.0

• Precise, thin metal photo-etched parts – for perfectly looking details on models
• Suitable for painted or unpainted models
• The parts are fixed to the etching frame with a protective film – no cutting is required.

Application

1. Peel off the backing film to separate the parts from the etched sheet – handle carefully to avoid bending the parts.
2. Shape the parts, depending on their size, using ST-02 pointed tweezers , MH-08 bending pliers or MT-11 parts bender .
3. The Madworks OHBIG LED magnifying glass (1.8x or 2.3x) helps with precise placement.

fastening

• Superglue (CA-Glue)
• Recommended: Use the MT-51 adhesive applicator to avoid overflow.

Painting tips

• Can be used without painting.
• Optional: Matte clear coat for improved surface appearance
• Complete painting process: metal primer → base coat → paint layer → clear coat
  
  

Precautions:

1. For attaching photo-etched parts, the use of a slow-drying gel adhesive is recommended.

2. Since the transparent backing paper adheres strongly, it is recommended to first peel the backing paper off from the side before removing the parts with tweezers.

3. Due to the stainless steel material and the joint-point-free manufacturing process, small rust spots may occasionally occur; however, this does not affect the painting.

4. Replacement parts are included for most of the small parts that are easily lost, so you can use them without worry.

5. You can use the examples as a guide for applying the waterslide decals to the model. Warning labels and model markings can be freely positioned as you wish.